However, many others have contributed in one form or another (newsgroup postings, email, laser parts, etc.). They are cited in the Acknowledgements and/or in the individual sections which contain their material. And, by the way, the name: "Sam's Laser FAQ" was more or less created by those who have read and commented on it via the newsgroups or direct email. The name stuck in part because the original one: LASERS: Safety, Info, Links, Parts, Types, Drive, Construction" was just way too long. :)
While I had kept in touch with laser technology since their invention in the early 1960s, my direct contact with lasers was relatively limited until much more recently. Although there was the glass working I did for someone else's home-built HeNe laser, the ruby laser I inherited at my high school because no one else wanted it, and the little commercial HeNe laser there used to view the hologram in an issue of Scientific American, I was not yet really hooked on lasers.
In fact, the first real lasers that I actually owned were purchased from a surplus outfit in 1990 or so - a couple of small helium-neon laser tubes and power supplies. I only bought those because a friend of mine had casually mentioned that I didn't have any lasers. I couldn't let that statement stand without doing something! Well, after mounting, wiring (which wasn't much), and testing them, I thought to myself: Well, these are kind of cool and might even come in handy someday. (My friend quickly lost interest once he realized they weren't powerful enough to burn anything!) I dragged them out every so often to make sure they still worked but that was about it, laser-wise, for awhile.
Then a few years later, having spent a lot of time on the USENET newsgroups answering questions (mostly those in the sci.electronics hierarchy, sci.optics, alt.lasers, and the like), it became clear that there was virtually NO practical laser related information on the Web. Even with my somewhat limited contact with lasers, the scary thing was that it would appear that I already had more of this sort of hands-on knowledge than was available in cyberspace - and probably anywhere else outside the laser industry. Sure, the major laser manufacturers were beginning to discover the Internet for their sales and advertising, and there were some academic and research sites as well. But, if what you wanted was to be able to light up a HeNe laser tube or build a power supply for one, wire up a laser diode without blowing it out, do anything with an argon ion laser or diode pumped solid state laser, or (gasp!) build a laser from scratch - forget it. There was virtually nothing to be found on-line and only a bit more in print. Much of what did exist (on the Web at least) was incorrect, incomplete, dangerous, or all of the above. (There is more history below.)
Sam's Laser FAQ is NOT an academic paper or reference work on quantum mechanics, gas discharges, or solid state physics. You can relax. It is about getting your hands into lasers safely and on a realistic budget. There is only a bare minimum of heavy math and only a few equations. The dozens of thick, expensive technical books and thousands of research papers on basic laser science and advanced laser technology exist to handle that! Sam's Laser FAQ is for the experimenter, hobbyist, weekend tinkerer, and budding mad scientist. For you! Enjoy. :)
For contact info, please see the Sci.Electronics.Repair FAQ Email Links Page.
Copyright © 1994-2010
Reproduction of this document in whole or in part is permitted if both of the
following conditions are satisfied:
1. This notice is included in its entirety at the beginning.
As of October, 2004, I know the following Web sites are using
material from Sam's Laser FAQ without permission or acknowledgement:
I have attempted to send email to the operators of all these Web sites.
The email either bounced or there has been no response.
If you are the Webmaster or developer of one of these Web sites,
it's simple and painless to include the necessary acknowledgements.
Please contact me via the Sci.Electronics.Repair FAQ
Email Links Page.
I also often find text or graphics from Sam's Laser FAQ in eBay auction
listings without acknowledgement. This, too, is a violation of fair use.
But the requirements are even simpler and would be satisfied by adding
However, in general, my preference would be to simply provide a link to
the appropriate section (or sections) of Sam's Laser FAQ rather than including
an excerpt in the auction listing.
When a violation is found, I will normally attempt to contact the seller
and have them amend the auction listing but if that fails, their eBay ID
will be added to this list and further action may be taken through
eBay or legal channels.
Presently, the following eBay IDs have not acknowledged emails with reference
to copyright violations: onlinesurplus, reliabletools.
Anyone in these lists who respond and comply will have all references to
their transgressions expunged from this document.
Many of the circuits have been reverse engineered - traced from various
schematics or actual hardware. There may be errors in transcription,
interpretation, analysis, or voltage or current values listed. They are
provided solely as the basis for your own designs and are not guaranteed to be
'plans' that will work for your needs without some tweaking.
Many power supplies and other laser components operate at extremely lethal
voltage and current levels. The optical output from even modest power lasers
can result in instant and irreversible damage to vision. No one ever should
attempt to operate, troubleshoot, repair, or modify such equipment without
understanding and following ALL of the relevant safety guidelines for lasers
and high voltage and/or line connected electrical and electronic systems.
We will not be responsible for damage to equipment, your ego, county wide
power outages, spontaneously generated mini (or larger) black holes, planetary
disruptions, or personal injury or worse that may result from the use of this
Note that I have no business relationship (financial or otherwise) with any
of the laser product manufacturers, sales, or service companies, referenced in
this document and benefit in no way by recommendations or suggestions to check
out their Web sites. In addition, a requirement of any Sci.Electronics.Repair
FAQ or Sam's Laser FAQ mirror site is that there be no advertising of any kind
forced on you within the pages of these documents - even for those that are
hosted on commercial servers.
And, yes, flattery will get you everywhere but I am almost as eager to have
any feedback (good or bad), corrections, suggestions, or additions. Please
feel free to contact me via the
Email Links Page. I will make every effort to
reply, usually within less than 24 hours. Sam's Laser FAQ has been and
continues to be a labor of love. My only reward (aside from the occasional
dead laser or other high-tech toy that gets sent my way) is the knowledge that
someone, somewhere, is using this material and is hopefully enjoying the
fruits of my effort and making use of them in a productive way.
There are a few people who have gone well beyond the level of these casual or
All Rights Reserved
2. There is no charge except to cover the costs of copying.
Use Without Permission or Acknowledgement Alerts
While I am flattered when other people are interested in what I've
developed, everything in Sam's Laser FAQ is copyrighted material.
This includes, but may not be limited to: all text, photos, diagrams, and
schematics, as well as the look and feel. Obfuscation of the material
by removing or adding to it, changing colors, etc., does not make it
acceptable! The laser community is rather small so violations will
very likely be uncovered. If you're using Sam's Laser FAQ material on
a public Web site or in an eBay auction, I will find it. As noted in
the section above, non-commercial use of this material is permitted as
long as the source is acknowledged in an appropriate manner. So, why
take a chance at ending up in this hall of shame for the World to see! :)
However, for-profit use is strictly prohibited without prior approval.
"This material is from Sam's Laser FAQ."
"This material is from Sam's Laser FAQ which may be found at
This document is still under development and will probably continue to be in
this state until will beyond the time when the Sun turns into a red giant or
Hell freezes over, though the Engineers may be able to prevent the latter, at
While I have written a good portion of Sam's Laser FAQ from my first-hand
knowledge and experiences, information from many other sources has been
invaluable in filling gaps and even constructing some of the foundations.
Much of this has been from postings to USENET newsgroup and other discussion
groups, as well as via private email. Wherever possible, I have acknowledged
these individual contributions. However, if you feel that there is something
here you wrote without being recognized, please send me mail via the
Email Links Page.
Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied:
1. This notice is included in its entirety at the beginning.
As of October, 2004, I know the following Web sites are using material from Sam's Laser FAQ without permission or acknowledgement:
I have attempted to send email to the operators of all these Web sites. The email either bounced or there has been no response.
If you are the Webmaster or developer of one of these Web sites, it's simple and painless to include the necessary acknowledgements. Please contact me via the Sci.Electronics.Repair FAQ Email Links Page.
I also often find text or graphics from Sam's Laser FAQ in eBay auction listings without acknowledgement. This, too, is a violation of fair use. But the requirements are even simpler and would be satisfied by adding something like:
However, in general, my preference would be to simply provide a link to the appropriate section (or sections) of Sam's Laser FAQ rather than including an excerpt in the auction listing.
When a violation is found, I will normally attempt to contact the seller and have them amend the auction listing but if that fails, their eBay ID will be added to this list and further action may be taken through eBay or legal channels.
Presently, the following eBay IDs have not acknowledged emails with reference to copyright violations: onlinesurplus, reliabletools.
Anyone in these lists who respond and comply will have all references to their transgressions expunged from this document.
Many of the circuits have been reverse engineered - traced from various schematics or actual hardware. There may be errors in transcription, interpretation, analysis, or voltage or current values listed. They are provided solely as the basis for your own designs and are not guaranteed to be 'plans' that will work for your needs without some tweaking.
Many power supplies and other laser components operate at extremely lethal voltage and current levels. The optical output from even modest power lasers can result in instant and irreversible damage to vision. No one ever should attempt to operate, troubleshoot, repair, or modify such equipment without understanding and following ALL of the relevant safety guidelines for lasers and high voltage and/or line connected electrical and electronic systems.
We will not be responsible for damage to equipment, your ego, county wide power outages, spontaneously generated mini (or larger) black holes, planetary disruptions, or personal injury or worse that may result from the use of this material.
Note that I have no business relationship (financial or otherwise) with any of the laser product manufacturers, sales, or service companies, referenced in this document and benefit in no way by recommendations or suggestions to check out their Web sites. In addition, a requirement of any Sci.Electronics.Repair FAQ or Sam's Laser FAQ mirror site is that there be no advertising of any kind forced on you within the pages of these documents - even for those that are hosted on commercial servers.
And, yes, flattery will get you everywhere but I am almost as eager to have any feedback (good or bad), corrections, suggestions, or additions. Please feel free to contact me via the Sci.Electronics.Repair FAQ Email Links Page. I will make every effort to reply, usually within less than 24 hours. Sam's Laser FAQ has been and continues to be a labor of love. My only reward (aside from the occasional dead laser or other high-tech toy that gets sent my way) is the knowledge that someone, somewhere, is using this material and is hopefully enjoying the fruits of my effort and making use of them in a productive way.
There are a few people who have gone well beyond the level of these casual or passive contributions:
As with many large companies, upper management was behaving in classic Dilbert style, with chronic and terminal foot-in-rear-end disease. They were thus incapable of appreciating the need for the next generation system that would have been zillions of times better in every respect than what was being sold and could have maintained the company's leadership position in high performance three-dimensional visualization.
While my official title had a "Technical Director" in it, I had little to direct, technically or otherwise! So, out of boredom, I turned to the then still somewhat novel means of communication, the Internet. (Yes, I know, the Internet goes back to the 1970s but Mosaic, the predecessor of Netscape, was kind of new in 1994.) I discovered USENET newsgroups, in particular, the sci.electronics hierarchy including sci.electronics.repair; alt.home.repair and misc.consumers.house; and alt.lasers. I initially gravitated to the repair newsgroups because I had always been interested in repair of almost anything mechanical and electronic.
During the next few years, I replied to literally 10s of thousands of questions on electronics and electronics repair, as well as some on lasers - check them out by searching on Google Groups. At some point, Filip "I'll buy a vowel" Gieszczykiewicz (firstname.lastname@example.org) contacted me via email and asked if I'd like to upload some of my material to his Web site which hosted the original Sci.Electronics FAQ. Thus were born what are now the Sci.Electronics.Repair FAQs including the "Notes on the Troubleshooting and Repair of..." series and other documents on electronics. (Fil still hosts our main S.E.R FAQ site at repairfaq.org.)
As noted in the Foreword, while replying to a few questions on lasers, it became obvious that there wasn't much reliable information on practical aspects of lasers on the Internet (the Web and newsgroups). CD players and CDROM drives contained laser diodes so the first laser document to be written was one on the care and feeding of laser diodes removed from CD players. When questions were posted on Helium-Neon (HeNe) lasers, I dug up my surplus lasers and answered as best as I could - which was still usually better than what others could provide (though given what I know now, probably not much better!). Sam's Laser FAQ really took off when I was given a bunch of HeNe laser heads and power supplies - several of which I could reverse engineer. And the rest, as they say, is history! :)
I officially quit the corporate World in 1996 and during the next few years devoted the bulk of my time to developing the S.E.R FAQ in general, but mostly - and increasingly - specifically Sam's Laser FAQ. I was also an independent engineering consultant, accepting the occasional contract job if I thought it would be technically fun and rewarding and paid at least enough to make any hassles tolerable.
Near the end of 2000, I began working at Drexel University (Philadelphia, PA) as a Research Professor in the Center for Microwave and Lightwave Engineering (CMLE), in the Electrical and Computer Engineering (ECE) Department. I had done my undergraduate work at Drexel during a time long long ago and contacted their alumni relations department in search of some server space to mirror the S.E.R FAQ. During a meeting to discuss the matter, I casually asked if anyone was doing anything with lasers. They introduced me to of all people, the professor who amazingly had been my academic adviser from back then and he even remembered me! As it turned out, there was a need for someone with practical laser experience. I hadn't intended to get a real job but after taking some time to think it through, the idea of being back in academia had a certain appeal and I decided to give it a shot. So, now I do real laser work in a university setting. Should you care, the research involves high performance mode-locked and chirped solid state microchip lasers for millimeter wave communications, lidar/radar, and biomedical imaging. There are some papers at the CMLE Web site (which I just happen to maintain as well) with much more information.
Since this is not a tenure track faculty position, I don't have to teach classes, attend faculty meetings, deal with academic politics, or have quite the pressure to publish or perish. I've been down that road and am not eager to repeat it. However, I have a couple of very talented graduate students and although I don't really own them, we make a great team with their theoretical knowledge complementing my practical experience. And, they are really impressed when I produce any sort of visible laser (especially green ones) from my pocket (everything we do at CMLE so far is in the infra-red). The only down-side was that since Research Professor is actually a staff (not a faculty) position, my status ranked somewhere between that of a garden slug and slime dwelling worm in the university hierarchy. :) In fact, as of the Summer of 2005, I am simply a consultant to Drexel and the CMLE group, no longer being officially on the staff.
In addition to the Drexel work, I continue to do the occasional engineering consulting (same criteria for acceptance of jobs apply - there has to be a fun factor involved!). But enhancement of Sam's Laser FAQ still represents a major portion of my efforts. I expect this to continue for the foreseeable future.
I currently own a variety of lasers including numerous HeNe laser tubes, heads, and complete lasers (including other colors than red) from very small to fairly large, and commercial and home-built power supplies; and several air-cooled argon ion laser heads, my home-built power supply, and a still-in-need-of-reassembly Omni-150. I have countless laser diodes and a few complete modules, pulsed Nd:YAG heads with a home-built power supply, a high power CW Nd:YAG head in need of a new arc lamp (and a small miracle which will probably never happen), several DPSS green lasers (both commercial and home-built), and external mirror HeNe lasers using tubes with one and two Brewster windows mounted in home-built resonators (including a nifty one-Brewster tube that does green!). My oldest commercial laser is a Spectra-Physics model 130B HeNe laser built like a tank which has a manual dated 1966 (though I don't know if my actual sample is quite that old. Best of all, after a bit of tender loving care, it actually still lases. I do not know of any other working 130B lasers in the explored Universe. The next oldest is an American Optical 3100 HeNe laser - also the only known working sample of this laser still in existence. I power up both these lasers daily at least for a few seconds to show I still care about them. This appears to be the attention they desire and performance continues to be unchanged, even after several years for the 130B.
Most of the more interesting lasers are described in one form or another somewhere in this document. Wavelengths for the lasers I have so far include: 325 nm, 337.1 nm, 400 nm, 405 nm, 457 nm, 458 mm. 488 nm, 514.5 nm, 532 nm, 543.5 nm, 568 nm, 594.1 nm, 604.6 nm, 611.9 nm, 632.8 nm, 635 nm, 640 nm, 647 nm, 658 nm, 670 nm, 694.3 nm, 780 nm, 808 nm, 830 nm, 870 nm, 980 nm, 1,064 nm, 1,321 nm, 1,523.1 nm, and 10,600 nm. If you don't recognize all (or any!) of these wavelengths now, you will by the time you have read through Sam's Laser FAQ! And, if you are at all curious, my favorite wavelength is 594.1 nm, which is something along the lines of traffic-light yellow. :)
Many of these lasers and laser related equipment have been given to me by various generous people as a sort of reimbursement for the vast amount of free information I have provided on-line - both in Sam's Laser FAQ and the other documents on consumer electronics repair and general electronics information (all part of the Sci.Electronics.Repair FAQ) and from my numerous contributions to the various USENET newsgroups including alt.lasers, sci.optics, sci.electronics.repair, and other technical forums (over 30,000 postings to date, most being replies to requests for assistance in various areas). I also buy occasional junk lasers on eBay or mail order but some of the most interesting ones have been sent to me in response to my request for such toys. :) (See the section: Please Don't Scrap Your Unwanted or Broken Lasers or Laser Related Equipment and Parts!.)
At some point in the future I do plan to construct some truly home-built lasers, probably starting with the more unusual ones outlined in the chapter: Home-Built Pulsed Multiple Gas (PMG) Laser. I have a several vacuum pumps and gauges, and neon sign transformers, and a wide variety of suitable electronic components, but still need to put together a proper gas delivery system and acquire the required special gases. If only politicians generated more than hot air. :) Oh, and to find the time!
Obviously I would love to get working units as well but since this effort is primarily for non-profit use to expand knowledge and further enhance the FAQ, all I can really pay is slug mail shipping and maybe a wee bit more for something of sufficient entertainment value (mine). :-)
Any information found during my dissection or repairs would eventually find its way into this continually evolving document. While I rarely sell anything that I have revived or restored (how could I part with such things?!) if I were to do so with any items obtained via this request, I would be happy to share any net proceeds with the contributor.
In addition to hardware, schematics for laser diode drivers, HeNe, Ar/Kr ion, and other laser power supplies, as well as other laser related circuits are also of particular interest. Where permitted, these would be added to the FAQ and/or made available at the Web sites (i.e., they are not proprietary or in violation of copyright restrictions if made public).
Also see the "Wanted to Acquire" sections of Sam's Classified Page for other laser as well as non-laser (mostly high vacuum and high voltage) parts, equipment, gadgets, and assorted tid-bits I'm interested in obtaining.
So, please send me (Sam) mail via the Sci.Electronics.Repair FAQ Email Links Page if you have any of this sort of stuff cluttering up your basement, garage, or attic, and really need the space. :)
I currently have access to accounts at the University of Pennsylvania (UPenn) and Drexel University which I use to create, edit, and test the material in the Sci.Electronics.Repair FAQ and Sam's Laser FAQ. The primary account I use for FAQ development is at UPenn and this seems to be secure for the moment the situation can change from one year to the next. The Drexel computer is probably reliable as far as a long term relationship but for some reason, USENET access is limited and posting doesn't seem to work at all.
Therefore, I am looking for access to 1 or 2 additional unix or linux systems, preferably at academic institutions like colleges or universities, but I will also consider other types of not-for-profit organizations. For obvious reasons, I really do not want to do this in association with anything commercial. My needs are modest: 1 GB of disk space, telnet or ssh, ftp or sftp, emacs/gnus read/post, muttmail, and publicly accessible Web space. Most of what I do is editing and email so processing requirements are modest and shouldn't impact other activities. However, a reliable supported environment is critical to my sanity so your personal server farm isn't something of much interest. :)
I do not want and will not accept monetary contributions for this effort. But, a way to help the FAQ development would be to provide stable computer access. If you know of, or are able to offer such a resource, please contact me via the Sci.Electronics.Repair FAQ Email Links Page. In return, of course, you get a local copy of the absolutely latest and greatest versions of the FAQs (and space permitting), all the associated ancillary material. And, of course, priority email replies to technical questions! Thank you! :)
However, on-line and print resources with detailed information on driving laser diodes and powering helium-neon lasers seem to be scarce. Some of those that do exist are incorrect and potentially dangerous (or at least destructive). There appears to be virtually nothing at all on argon/krypton ion, CO2, solid state, and other lasers. And, even less on the nitty-gritty of amateur laser construction.
This document was written in the hopes of rectifying this situation.
Contributions in almost any form are always welcome and will be acknowledged appropriately.
However, note that there is, and never will be, more than passing mention of laser weapons in Sam's Laser FAQ. This is NOT the place to go to learn about such things. If that's your main interest, you'll have to look elsewhere, sorry.
PART I includes some general information on lasers and laser related topics. In addition to essential laser safety information, there are general items of interest, discussions of a variety of laser instruments and applications, and a list of suggested laser and laser based experiments and projects.
There isn't much in the way of laser physics and other theoretical topics. (You can now breathe a sigh of relief!) Nor will there be extensive treatment of the design of laser shows, holography experiments, interferometers, or the like - though some ideas are provided just to stimulate your interest. I leave these to the many excellent books and articles that have been published over the years.
Our major emphasis is on the practical aspects of common lasers (including diode, HeNe, argon/krypton ion, CO2, HeCd, and diode and lamp pumped solid state) that may be found outside of a well funded research lab - those available at reasonable cost on the used or surplus market, for example.
PART II provides access to the rest of the World in terms of laser information, and laser and parts manufacturers, sales, and service. (I would include the rest of the Universe but my interstellar network is still in beta testing.) There are extensive lists of references and Web links to laser safety sites, tutorials on lasers and laser related topics, and laser and optics organizations and manufacturers.
If you are interested in detailed information on all types of lasers, laser applications, laser physics, laser experiments, or laser research, consult the chapter: Laser Information Resources for a list of books, magazine articles, and Web links covering everything laser related from basic questions like "What is a laser" or "How do lasers work" to "Spectra in stimulated emission of rare gases" and "Dissociative excitation transfer and laser oscillation in RF discharges" - and everything in between. A quick check of some of the educational Web sites may provide everything you need.
The chapter Laser and Parts Sources includes pointers to sources for everything from $2 laser diodes to $100,000 CO2 laser based machining centers - new, used, surplus, and salvage.
PART III deals with the care and feeding of lasers constructed from commercial components like helium-neon tubes and laser diodes. There is also extensive information on the design and construction of power supply, driver, and other circuits.
The chapters on specific types of lasers includes at least *10* circuits for driving laser diodes, *20* complete schematics for helium-neon laser power supplies, as well as simple modulators and other useful goodies. Most of these have been tested and/or came from working commercial designs and can be built using readily available inexpensive parts.
The material on argon/krypton ion lasers includes extensive information on the general characteristics and features, power supply requirements and design considerations including circuit descriptions, and maintenance and alignment of these highly prized devices. There are several complete ion laser power schematics of varying levels of sophistication which can be replicated using readily available parts or used as the basis for a custom design of your own!
There is also coverage of CO2 lasers (including a discussion of sealed CO2 tubes which are powered in a very similar way to helium-neon lasers) as well as some basic info on HeCd lasers.
Solid state lasers are now dealt with in considerable detail along with complete schematics for ruby and Nd:YAG power supplies.
To the best of my knowledge, no other resource in the explored universe (or elsewhere) currently comes close to providing as much practical information on these topics in a form which is both easy to read and readily accessible in one place - if at all.
PART IV is for the true basement experimenter and provides information on actually constructing entire lasers from basic materials like beach sand and copper ore. :-) Well, maybe not quite that basic but: glass tubing, mirrors, hardware, gases, chemicals, and electronic components like transformers, resistors, capacitors, and diodes - and laser safety and high voltage warning signs!
Where you really think constructing a laser from scratch would be a challenge, fun, and educational, first keep in mind that such an endeavor is generally a LOT of work and depending on the type of laser, may require access to fairly sophisticated facilities and equipment (at least compared to the average kitchen sink - and that, too, may be needed!). These may include the need for glass blowing, a high vacuum system, access to a machine shop, and sources for assorted lab supplies, chemicals, pure gases, and specialized optical and electronic components. This is not to say that your dream is unrealistic or impossible - just that one must be quite determined to see such a project through to a successful conclusion and the information in this document will get you started.
There are many other documents at the Sci.Electronics.Repair (S.E.R) FAQ Web site or one of its mirror sites which may be of use in the design, testing, and repair of laser equipment. The Main Table of Contents (ToC) provides links to a variety of information on troubleshooting and repair of many types of equipment, general electronics, an assortment of schematics, over 1,000 technology links, and much more. Most of these documents are nicely formatted, indexed, and cross-referenced. (Silicon Sam's Technology Resource, which may be present at this site and others, usually contains more recent versions of many of these same documents some of those (particularly the large repair guides) under the S.E.R FAQ Main ToC are easier to use and the actual content differences are likely to be minor.)
The first document below is also part of Sam's Laser FAQ itself. It is also the most important:
Where the manufacturer and part number for your laser diode are known, by all means take advantage of the extensive applications information that is likely to be available. Start with a search of "Laser Diode Scout" at ThorLabs. Driving laser diodes without blowing them out is often not easy - even for an experienced design engineer!
A laser is a source of light but unlike anything that had ever been seen or implemented before 1960 when Theodore H. Maiman of Hughes Aircraft mounted a specially prepared synthetic ruby rod inside a powerful flash lamp similar to the type used for high speed photography. (If you're into reading heavy scientific literature, the reference is: T. H. Maiman, "Stimulated Optical Radiation in Ruby", Nature, 6 Aug. 1960, vol. 187, no. 4736, pgs. 493-4.) When his flash lamp was activated, an intense pulse of red light burst forth from the end of the rod that was both monochromatic (a single color) and coherent (all of the waves were precisely in step). The difference between the output of a laser and that of an incandescent light bulb is like the difference between white noise and a pure tone.
The laser age was born. Within a very short time, in addition to many more solid state materials, laser action was demonstrated in gases (the ubiquitous helium-neon laser was the first gas laser though it originally only produced invisible IR wavelengths), liquids, and semiconductor crystals. Almost every conceivable material was tried in the frenzy to produce new and interesting lasers. Even some varieties of Jello(tm) brand dessert were blasted with xenon light, and according to this legend, are supposed to work fairly well. I wonder whether the flavors have to be all natural. :-) (See the section: Comments on the Jello Laser Legend for a discussion on this very exciting topic.)
See Laser Stars - LASER HISTORY (1917-1996) for an interesting chronology of laser development, discovery, and applications.
Although the first working laser was built at Hughes Aircraft, much of the early theoretical and practical work was done at Bell Labs - work which continues till the present day. See The Invention of the Laser at Bell Labs: 1958 - 1998. Quoting from this site:
"The invention of the laser, which stands for light amplification by stimulated emission of radiation, can be dated to 1958 with the publication of the scientific paper, Infrared and Optical Masers, by Arthur L. Schawlow, then a Bell Labs researcher, and Charles H. Townes, a consultant to Bell Labs. That paper, published in Physical Review, the journal of the American Physical Society, launched a new scientific field and opened the door to a multibillion-dollar industry."
In many ways, the laser was a solution looking for a problem. Well, the problems soon followed in huge numbers. It would be hard to imagine the modern world without lasers - used in everything from CD players and laser printers, fiber-optic and free-space communications, industrial cutting and welding, medical and surgical treatment, holography and light shows, basic scientific investigation in dozens of fields, industrial cutting and welding, and fusion power and Star Wars weapons research. The unique characterisics of laser light - monochromicity (the light is very nearly a single wavelength or color), coherence (all the waves are in step), and directionality (the beam is either well collimated to start or can easily be collimated or otherwise manipulated) make these and numerous other applications possible. In fact, it is safe to say that the vast majority of laser applications have not yet even been contemplated. For an idea of the extensive and diversified applications for which the laser has become an essential tool or component, see for example: Rami Arieli - The Laser Adventure: Laser Applications.
The output of a laser can be pulsed or a continuous beam; visible, IR, or UV; with power ranging from less than a milliwatt to millions of watts. However, nearly all lasers have the following in common:
See: Lawrence Livermore National Laboratory for more information. Search for "lasers".
We present only the briefest of summaries. Some additional more specific material is presented in the chapters: Helium-Neon Lasers and Diode Lasers.
Please refer to the diagram: Basic Laser Operation whlle reading the following explanation. The numbers in () denote each step in the lasing process.
Normally, nearly all atoms, ions, or molecules (depending on the particular laser) of the lasing medium are at their lowest energy level or 'ground state' (1).
To produce laser action, the energy pumping device must achieve a population inversion in the lasing medium so that there are a majority of atoms/ions/or molecules at the upper energy level of the pair that participates in the stimulated emission. Note that those designated 'Energy Level 2' in the diagram are the ones of interest; some have also been raised to 'Energy Level 1' and just sit there taking up space (2). :-)
At random times, some of these excited atoms/ions/molecules will decay to the lower energy state on their own. In the process each one emits a single photon of light in a random direction. This is called 'spontaneous emission' and by itself isn't terribly useful. It is basically the same process that accounts for the glow of a neon sign, or the phosphor coating of a fluorescent lamp or screen of a CRT (3).
However, Einstein showed that if one of these photons happens to encounter an excited atom/ion/molecule in just the right way, it will drop down to a lower energy state and emit a photon with several amazing properties compared to the original one. Among these are:
The new photon will have exactly the same polarization as well, though this is not a requirement to create a laser. However, where the resonator favors a particular polarization orientation (e.g., there is a Brewster angle window or plate in the beam path or the cavity is highly asymmetric), or in some cases, there is a particular magnetic field configuration, the output beam will also be polarized - but this is for the advanced course. :-)
So, imagine the lasing medium (perhaps, it is easiest to visualize it like the glowing gas in a neon sign) spontaneously emitting these photons in all direction at random times. Most will be lost exiting the side of the discharge tube or hitting one of the mirrors at an angle and then escaping its confines.
Occasionally, however, a photon will happen to be emitted nearly parallel to the long direction of the resonator (3,4). In this case it will travel down to one of the mirrors and be able to bounce back and forth many times (with some configuration of slightly concave mirrors, if there were no losses, it could even do this indefinitely). So far, pretty boring! However, along the way, it encounters excited atoms/ions/molecules and STIMULATES them to give up their photons. As this progresses, what was once a single photon is now an avalanche of more and more photons via this stimulated emission process (3,4,5).
The resulting beam is highly monochromatic (nearly entirely one wavelength) and coherent (all the waves are in-step). It is also either well collimated (nearly parallel rays for most lasers including gas and solid state types) or appears to originate from a point source (diode lasers). In either case, the beam can easily be manipulated in ways impossible with more common light sources.
If the pumping source is adequate and enough atoms/ions/molecules are being raised to the upper energy level to maintain the population inversion while this is happening, the laser action will continue indefinitely (barring trivial problems like overheating or depletion of the power available on the National Electric Grid). This results in a continuous wave laser. If the pumping cannot be maintained or some energy levels get clogged up, the result is a pulsed laser. (Therefore, Basic Laser Operation actually illustrates a pulsed laser since pumping is not sustained.)
There you have it! Everything else is just details. :-)
For some (still easy to understand) details on the principles of operation of the ubiquitous helium-neon laser, see the section: Theory of Operation, Modes, Coherence Length, On-Line Course as well as the chapters on other specific types of lasers. Additional information on general laser characteristics may also be found in the chapter: Items of Interest.
There were several (mostly complete) courses (some are still under development and there were a few rough edges). While the original material was developed in the early 1970s (there were a number of diagrams with tube circuits!), it has been updated and had a lot to offer including by far the most complete on-line presentation of laser technology (e.g., resonator structures and power supply example schematics) that I know of - though not to the level of detail present in Sam's Laser FAQ! :)
The blurb that went along with the courses states:
"The LEOT (Laser/Electro-Optics Technology) curriculum was developed by CORD in 1970-1974 with funding from the U.S. Office of Education. At that time many books on lasers were available for physicists and engineers. Those books contained the rigorous theoretical information needed to develop new designs and applications for lasers. The LEOT curriculum does not provide that kind of information, but instead, is written for the technicians who will build, modify, install, operate, troubleshoot, and repair lasers.
Technicians are a vital link in the advancement of photonics technology. They are the workers in the laboratories, plants, and fields who ensure that lasers, and other photonics related equipment, operate properly and reliably."
So these course were very practical in nature and provide a nice companion to Sam's Laser FAQ's practical orientation.
Unfortunately, as of Summer, 2001, links to these courses from the CORD homepage have been removed supposedly due to the expiration of their funding. While the courses are available for purchase in print form, It's a pity that this has happened. Print is not the same as on-line, even if it were free.
Hope you saved whatever you wanted from my copy that used to be on-line. Awhile ago, CORD had actually approved of my making a mirror site available with the LEOT materials, though they didn't offer to help in any way (like provide a zip or tar copy of everything). I was even on their LEOT email distribution list at one point. Then, lobotomized bean counters must have gotten involved and they had their legal department send threatening emails to anyone who they found to have copies of their Web pages on-line.
But now (April, 2008), large portions seem to be back at Index to LEOT Course Material. Given the past history, don't expect it to be stable or remain for long. Entering from CORD: Curriculum Morphing Project, which one might think should be more reliable, seems to go to an older incomplete table of contents.
Should the links above not work, here at least are the main table of contents (list of modules) for each course that presently exists or is under development:
Course 3: Laser Technology
Course 4: Laser Electronics
Course 6: Laser and Electro-Optic Components
Course 10: Laser and Electro-Optic Measurements
Applications of Photonics in Telecommunications (under construction)
This was all great educational content for those who wish to gain a better understanding of the principles of laser operation, find out what is in a laser, see examples of power supply circuits, and much more. But, it is designed at a level that shouldn't put you to sleep with too much heavy math. :-)
The good news is that a new set of courses are under development. Some links include:
These links will no doubt decay fairly quickly but a Web search should be able to locate where they went. :)
The organization of topics is as follows:
Some specific links with the most general interest are:
FLASH!The on-line manuals (all in PDF format) have reappeared on the MEOS Web site! Go to MEOS, "Didactic Products", "EXP - Photonics Experiments", and then at the bottom of most of the individual experiment pages is a link to "Theoretical Background". I have also archived them on the Drexel mirror site should they disappear again.
Note that EXP05, EXP07, and EXP08 link to the same file, as do EXP13 and EXP15. EXP11 and EXP30 through EXP34 do not have any accompanying files as yet.
If MEOS should complain, these will have to be removed. So, get them while you can! But I doubt they'll complain. And most are also archived at the Wayback Machine Web Site
Wavelengths: Red (635 nm, actually may appear slightly orange-red) through deep Red (670 nm) and beyond, IR (780 nm, 800 nm, 900 nm, 1,550 nm, etc.) up to several um). Near-UV, violet, and blue laser diodes are available from around 380 nm to 450 nm but are still very expensive. Green laser diodes have been produced in various research labs but until recently, only operated at liquid nitrogen temperatures, had very limited lifespans (~100 hours or worse), or both.
Beam quality: Fair to high depending on design. The raw beam is elliptical or wedge shaped and astigmatic. Correction requires additional optics (internal or external). Coherence length anywhere from a few mm to many meters.
Output power: 0.1 mW to 5 mW (most common), up to 100 W or more available. The highest power units are composed of arrays of laser diodes, not a single device and may exceed 100,000 W.
Some applications: CD/DVD players and CDROM/DVDROM drives, LaserDisc, MiniDisc, other optical storage drives; laser printers and laser fax machines; laser pointers; sighting and alignment scopes; measurement equipment; high speed fiber optic and free space communication systems; pump source for other lasers; bar code and UPC scanners; high performance imagers and typesetters, small (mostly) light shows; medical treatment (ophthalmic, uninary, and others).
High power laser diodes are the enabling technology for high efficiency Diode Pumped Solid State (DPSS) lasers and future energy efficient lighting.
Cost: $1 to $10,000 or more.
Comments: Inexpensive, low (input) power, very compact, but critical drive requirements. Many types of diode lasers are not suitable for holography or interferometry where a high degree of coherence and stability are required. However, see the section: Interferometers Using Inexpensive Laser Diodes since these common CD player and visible laser diodes may in fact be much better than is generally assumed. In addition, it has been reported that some inexpensive diode lasers appear to be even superior to traditional helium-neon lasers costing $Ks for holography. See the section: Holography Using Cheap Diode Lasers.
Wavelengths: Red (632.8 nm, actual appearance is actually orange-red) is most common by far. Orange (611.9), yellow (594.1 nm), green (543.5 nm), and IR (1,523.1 nm) HeNe lasers are also readily available (but these are less efficient and therefore more costly for the same beam power).
Beam quality: Extremely high. The output is well collimated without external optics and has excellent coherence length (10 cm to several meters or more) and monochromicity. Most small tubes operate with a single spatial/transverse mode (TEM00).
Output power: 0.5 to 35 mW (most common), up to 250 mW or more available.
Some applications: Industrial alignment and measurement; blood cell counting and analysis); medical positioning and surgical sighting (for higher power lasers); high resolution printing, scanning, and digitization; bar code and UPC scanners, interferometric metrology and velocimetry; non-contact measuring and monitoring; general optics and holography; small to medium size light shows, laser pointers (very rare noawadays but still sort of available), LaserDisc and optical data storage (obsolete, replaced by laser diodes).
Cost: $25 to $5,000 or more depending on size, quality, new or surplus.
Comments: Inexpensive, components widely available, robust, long life.
Wavelengths: Argon ion - Violet-blue (457.9 nm), blue (488 nm - single line), green (514.5 nm); Krypton ion - Green (521 and 532 nm), yellow (568 nm), red (647 nm). Other wavelengths throughout the visible spectrum (and beyond) are available (but generally weaker) and may be 'dialed up' on some models. Mixed gas (Ar/Kr) ion lasers (sometimes called "whitelight" lasers) may produce a combination of both sets of wavelengths.
Output power: 10 mW to 10 W. Research lasers up to 100 W.
Beam quality: High to very high. Single mode (TEM00) and multimode types available.
Some applications: Very high performance printing, copying, typesetting, photoplotting, and image generation; forensic medicine, general and ophthalmic surgery; entertainment; holography; electrooptics research; spectroscopy and other chemical and physics research; and as an optical 'pumping' source for other lasers.
Cost: $500 (surplus 100 mW) to $50,000 (multi-watt new) or more.
Comments: High performance for someone who is truly serious about either optics experiments like holography or medium to high power light shows.
Wavelength: Mid-IR. 10.6 um (10,600 nm) is by far the most common but 9.6 um and several other wavelengths are also possible.
Beam quality: High.
Output power: A few watts to 100 kW or more.
Some applications: Industrial metal cutting, welding, heat treatment and annealing; marking of plastics, wood, and composites, and other materials processing, and medicine including surgery.
Cost: New systems go for several $K to 100s of $K depending on specific type and output power. Used/surplus low to moderate power (up to 100 W) flowing gas systems may be available for under $500.
Wavelengths: Violet-blue (442 nm) and ultra-violet (325 nm) depending on the optics.
Beam quality: Very high. HeCd lasers usually use sealed narrow bore plasma tubes and operate in TEM00 mode.
Output power: 10s to 100s of mW.
Some applications: Non-destructive testing and spectroscopy.
Cost: High initial cost (many $K) due to low production volume and greater plasma tube and power supply/control system complexity. Older systems may be available for under $100 but almost always need tube replacement or regassing.
Comments: Less common than HeNe, Ar/Kr ion, and CO2 types. Few uses for the hobbyist except for the challenge value.
Wavelengths: Near-IR (most common are Nd doped materials, around 1,064 nm) to visible (ruby at 694.1 nm), many other materials are now being developed. Output may be frequency multiplied to yield a visible (532 nm) or UV (355 or 266 nm) beam.
Output power: Varies widely. Peak in the PetaWatt range (for large research lasers), average up to 1,000 W or more. Q-switching provides extremely high peak power in a short pulse.
Beam quality: Low to high.
Some applications: Materials processing (drilling, cutting, welding, trimming), green (532 nm) laser pointers and other visible lasers replacing argon ion types, inertial confinement fusion and nuclear bomb research, laser entertainment, laser rangefinders, laser weapons, target designation, medical/surgical, spectroscopy, study of very short pulse phenomena, study of matter, and many many others.
If you are now thinking: "I'd probably enjoy bamboo under the fingernails or root canal therapy more than any of this", perhaps lasers aren't for you. ;) However, if anything you have read so far seems fascinating or really way cool, then continue on. It doesn't take a lot of money to get into lasers ($10 will get you a laser and a simple laser show can be put together for under $25 - though it is quite possible to end up spending many $1,000s even on used or surplus lasers and laser related equipment!) but it does take a driving interest and the ability and willingness to construct and tinker. If you are incapable of changing a light bulb without the instruction manual, perhaps lasers aren't for you either. Lasers are also not the sort of thing where you are likely to find many other people in your immediate neighborhood sharing your passion except in a few places - mostly near laser manufacturers or research installations. So, be prepared to do most of your interaction via the Internet and other long distance correspondence. There are few laser clubs and no laser trading cards (but trading of laser equipment is quite popular)!
Having said all that, doing almost anything successfully with lasers can be very rewarding and if you haven't decided on a career, could give you a head start in the photonics area - the merging of lasers, optics, and electronics - which is one of the key technologies of today and the future.
If you are still in high school, and you REALLY want to get into lasers your choices for college would be University of Rochester, followed by a coin flip decision between University of Arizona or University of Central Florida. Also there are numerous other schools with some optics courses and laser research.
Of these, I still consider the HeNe laser to be the quintessential laser: An electrically excited gas between a pair of mirrors. It is also the ideal first laser for the experimenter and hobbyist. OK, well, maybe after you get over the excitement of your first laser pointer! :) HeNe's are simple in principle though complex to manufacture, the beam quality is excellent - better than anything else available at a similar price. When properly powered and reasonable precautions are taken, they are relatively safe if the power output is under 5 mW. And such a laser can be easily used for many applications. With a bare HeNe laser tube, you can even look inside while it is in operation and see what is going on. Well, OK, with just a wee bit of imagination! :) This really isn't possible with diode or solid state lasers.
While many other types of lasers may be acquired or constructed including: mercury vapor ion, nitrogen, excimer, dye, ruby, Nd/YAG, chemical, free electron, and X-ray, most of these are less commonly available as surplus. There could also be problems obtaining the 100 million volt particle accelerator required for the free electron laser and the small thermonuclear device needed to pump the X-ray laser. :-)
Now, back down to earth....
Where you are really interested in actually constructing any of these types of lasers from basic materials (e.g., not by simply hooking together commercial laser tubes and power supplies), check out the chapters beginning with: Amateur Laser Construction which include general information on the types and requirements for home-built lasers, setting up a laser lab, introduction to vacuum systems and glass working, and other really exciting topics.
How much do you like to build things? Would you prefer to assemble a bunch of parts, or do you want to blow your own glass tubes, too? Do you have any mechanical experience? Do you build electronic kits? Keep in mind that you will often be working with intense light (enough to instantly damage your unprotected eyes, and maybe your unprotected skin) and high voltages.
All laser experimenters (and optics types, too) should have a copy of "Scientific American"'s "Light and Its Uses."  It gives construction plans for a Helium-Neon (you blow the glass tube yourself), an argon ion (even more complicated), a CO2 (designed and built by a high school student, and able to cut through metal), a dye, a nitrogen (a great first laser, but watch out for UV light) and a diode laser (obviously, you buy the diode laser and assemble the driver circuit from the plans they supply). They also explain how to make holograms using visible and infrared light, microwaves and sound. There are other projects, too. The book is getting fairly old (the HeNe dates to the '60s), but it's still a great reference.
A nitrogen laser may be built for under $200 (maybe less than half that amount if you are lucky). It requires no mirror alignment (since it has no mirrors). The technology for building this laser was available to Ben Franklin, so there is nothing too critical in it. The hazards it presents are lots of ultraviolet light (spark discharges and laser beam), high voltage (necessary to arc across a 1/4 inch spark gap in a nitrogen environment) and circuit etcher (the main capacitor is made from an etched circuit board).
Once built, the nitrogen laser can drive many other projects. It can be used as a pump for the dye laser, for example. It will light up anything fluorescent. It is a pulse laser (10 ns) that can be repetitively pulsed (120 Hz is a likely frequency). Megawatt power is possible, but the total energy is low (due to the short pulses).
Helium-Neon laser tubes may be bought from many mail-order companies. I bought one from Meredith Instruments in Arizona. They cost about $15, and the power supply can be built or bought for about another $20. You have the option of buying tubes with mirrors attached or not. You might want to buy the mirrors attached, because aligning those mirrors is extremely tedious. I was given an "A" for constructing a working Helium-Neon laser from the parts in the Laser Lab in less than an hour. The class was given two semesters to gain the experience they needed to do that.
If you want more than one color from lasers, there are various ways to do it, but none of them are as nice as one might like. For $3,000 or so, you can buy a Helium-Neon laser that will produce laser light ranging from infra-red to green. All you have to do is turn a dial on the back. But it's very low power (a few mW) and not really very useful to the hobbyiest except as an expensive conversation piece. :)
Laser light shows usually use argon ion or krypton lasers and/or arc lamp or diode pumped solid state laser. The ion lasers are able to produce most of the colors of visible light, and some can also be dialed to the desired color. The solid state lasers are most often green but other colors are becoming available. However, professional quality laser systems usually cost many thousand dollars ($40,000 is not too unusual) and require either forced air or water cooling or a combination.
A dye laser is the usual solution to the multi-color problem. They are inexpensive and simple. They aren't especially tunable, unless you change the dye, although a diffraction grating can be used to tune a particular dye to various colors. One common dye that can be used in a dye laser is the green dye found in radiator antifreeze.
Mike Harrison (email@example.com) has a Web page in the early stages of development which lists graphic arts, industrial, medical, scientific, and other equipment which include internal lasers of all kinds. The page can be updated with your contributions as well. Take the link near the bottom of Mike's Electric Stuff Page (which also has a lot of other interesting topics).